(STL FILES ARE FOR 3D PRINTING, NOT A PHYSICAL ITEM)
Hey! Here's the STL File(s) for making the fire helmet and face shield from Fire Force. This prints in 3 parts that get glued together (the helmet might need to be broken into smaller pieces if you have a smaller volume printer). The face shield has a print in place hinge on it so it can freely switch positions.
Settings: I used a gyroid infill structure at 5% infill density and tree supports to get a strong print with a clean surface quality before sanding. Support touching only the build plate should be fine, though most parts don't even need any support aside from the name plate at the top.
Required Materials:
- 3D Printer
- Sandpaper
- Paint
- 2 part epoxy resin (gorilla epoxy ie.) or super glue
